Aerators & Pluggers - Pasture Aerator

Dirt Dog’s PA Series pull-type Pasture Aerators are ideal in agricultural conservation tillage and pasture renovations. The heavy-duty, knife-like tines on the aerator are designed with a twist in them to break-up compacted soil horizontally and vertically as they slice into the ground in a twisting fashion. This breaking action conditions the soil to soak up run-off water faster, allow fertilizer to penetrate deeper into the ground, and increase oxygen and water supplies to the plant roots. The built-in, metal weight box allows you to add any type of weight to help the aerator tines penetrate into the ground and reach maximum depth.

Pature Aerator

Click any photo for larger view

Pasture Aerator Features

  • 4” x 4” x 5/16” frame construction
  • Hydraulically adjustable transport wheels standard
  • All metal weight box available
  • Heavy duty grease able bearings
  • Rotors can be adjusted from 2 1/2, 5 and 7 1/2 degrees
  • Tines spaced 7 1/2" apart
  • Tines are designed with a twist to lift while fracturing the soil sideways
  • Available in Yellow, Red, Orange, Green and Blue
 

 

PA Specifications

Click to view Full PA Specs

 

 

 

                                                                            PA8                 PA10  
 
 
Horse Power
40-90
40-90
Working Width
86"
116"
Overall Width
97 3/8"
127 5/8"
Overall Length (Wheels Down)
136"
136"
Overall Height (with tines on the ground)
44 1/4"
44 1/4"
Weight (w/out added weight)
1950 lbs.
2500 lbs.
Max Ballast in Weight Box
2200 lbs.
2900 lbs.
Number of Tines
24 LH & 24 RH
32 LH & 32 RH
Tine Material
Forged & Heat Treated Steel
Tine Hub Spacing
7 1/2"
7 1/2"
Tine Penetration
Up to 8.125" depending on ground condition
Frame Construction
4" Sq. tubing all welded construction
Hitch Type
Heavy duty pull type with clevis hitch 1.25" max pin dia.
Main Tongue Beam
4" Sq. 
4" Sq. 
Hitch Jack
10" top wind jack mounted to frame
Rotor/Tine Support Hangers
1" x 7" heavy duty hangers
Rotor Bearings
Heavy duty greaseable bearings
Rotor Bearing Protection
.375" x 3.5" metal housing
Rotor Angle Adjustment
2.5°, 5°, 7.5°
2.5°, 5°, 7.5°
Tires & Wheels
9.5L x 15 8 PLY RIB TL ROLLED RIM 5 ON 5.5 BHC
Tine Depth Control - DO NOT TURN W/TINES IN GROUND
Add cylinder donuts to cylinder rod- included
Hydraulic Cylinder
3.5" x 8" ASAE tie rod
3.5" x 8" ASAE tie rod
Transportation Lock
Manual cylinder lock
Manual cylinder lock
Rear Axle Pivot
Greaseable
Greaseable